Lighting | Fluorescent Measures

Get Your Rebate

Products must meet the Canadian Certification Standards as outlined by the Standards Council Canada for product approval, or equivalent certification by an applicable Certification body such as ULc, ETLc, CSA, etc. Click here for additional information regarding product approvals and certification bodies.

Lighting | Fluorescent Measures

New T5HO high-bay fixtures | Four lamp

  • 4-lamp fixture, only 4-foot nominal length T5HO lamps
  • Fixtures must be mounted at least 16-feet above the floor
  • Fixture efficiency: must be greater than 90% for open fixtures and greater than 80% for enclosed fixtures
  • Must provide specification sheet(s) with application

Rebate

$25/fixture

New T5HO high-bay fixtures | Six lamp

  • 6-lamp fixture, only 4-foot nominal length T5HO lamps
  • Fixtures must be mounted at least 16-feet above the floor
  • Fixture efficiency: must be greater than 90% for open fixtures and greater than 80% for enclosed fixtures
  • Must provide specification sheet(s) with application

Rebate

$35/fixture

New T5HO high-bay fixtures | Eight Lamp or greater

  • Greater than or equal to an 8-lamp fixture, only 4-foot nominal length T5HO lamps
  • Fixtures must be mounted at least 16-feet above the floor
  • Fixture efficiency: must be greater than 90% for open fixtures and greater than 80% for enclosed fixtures
  • Must provide specification sheet(s) with application

Rebate

$43/fixture

The requirements described in the Technical Specification section are solely to meet the rebate requirements for the BNI program. They do NOT overrule or supersede in any way the permitting regulations, municipal, provincial or federal codes, standards, and any other relevant Acts currently in force. The technical specifications described in this program are meant to be the minimum required by the program to obtain rebates. Where the appropriate Authority Having Jurisdictions (“AHJs”) require a higher standard be in place, the person/company performing the work must follow the AHJ’s requirements. It is the responsibility of the person/company performing the work to know and follow codes, standards, and regulations.