Lighting | Interior Control Measures

Get Your Rebate

Products must meet the Canadian Certification Standards as outlined by the Standards Council Canada for product approval, or equivalent certification by an applicable Certification body such as ULc, ETLc, CSA, etc. Click here for additional information regarding product approvals and certification bodies.

Lighting | Interior Control Measures

Interior daylight controls – Fixture mounted dual occupancy and daylight controls

  • Sensors with “manual on override” are not eligible (i.e. automatic off cannot be disabled)
  • Fixture mounted dual occupancy and daylight controls, integrated for fixture mounted
  • Must control a minimum of 60 watt of load (after retrofit project)
  • Must provide specification sheet(s) with application

Rebate

$30/sensor

Interior daylight controls – Ceiling or wall remote mounted

  • Sensors with “manual on override” are not eligible (i.e. automatic off cannot be disabled)
  • Ceiling or wall remote mounted, minimum 150 watt controlled
  • Must control a minimum of 150 watt of load (after retrofit project)
  • Must provide specification sheet(s) with application

Rebate

$30/sensor

Interior daylight controls – Switch or fixture mounted

  • Sensors with “manual on override” are not eligible (i.e. automatic off cannot be disabled)
  • Switch or fixture mounted
  • Must control a minimum of 30 watt of load (after retrofit project)
  • Must provide specification sheet(s) with application

Rebate

$25/sensor

Interior occupancy controls – Ceiling or remote mounted sensor

  • Sensors with “manual on override” are not eligible (i.e. automatic off cannot be disabled)
  • Ceiling or remote mounted sensor
  • Must control a minimum of 150 watt of load (after retrofit project)
  • Must provide specification sheet(s) with application

Rebate

$50/sensor

Interior occupancy controls – Wall/switch mounted sensor

  • Sensors with “manual on override” are not eligible (i.e. automatic off cannot be disabled)
  • Wall/switch mounted sensor
  • Must control a minimum of 60 watt of load (after retrofit project)
  • Must provide specification sheet(s) with application

Rebate

$25/sensor

Interior occupancy controls – Fixture mounted sensor

  • Sensors with “manual on override” are not eligible (i.e. automatic off cannot be disabled)
  • Fixture mounted sensor
  • Must control a minimum of 30 watt of load (after retrofit project)
  • Must provide specification sheet(s) with application

Rebate

$30/Sensor

Interior occupancy controls – Refrigerated or freezer case sensor

  • Sensors with “manual on override” are not eligible (i.e. automatic off cannot be disabled)
  • Refrigerated or freezer case sensor
  • Minimum of 3 doors per sensor
  • Must control a minimum of 150 watt of load (after retrofit project)
  • Must provide specification sheet(s) with application

Rebate

$50/sensor

The requirements described in the Technical Specification section are solely to meet the rebate requirements for the BNI program. They do NOT overrule or supersede in any way the permitting regulations, municipal, provincial or federal codes, standards, and any other relevant Acts currently in force. The technical specifications described in this program are meant to be the minimum required by the program to obtain rebates. Where the appropriate Authority Having Jurisdictions (“AHJs”) require a higher standard be in place, the person/company performing the work must follow the AHJ’s requirements. It is the responsibility of the person/company performing the work to know and follow codes, standards, and regulations.